Independent education resourceInformation here does not replace care from a qualified health professional.
Peptide Therapy GuideClear peptide education

Educational guide

Youth To The People Yerba Mate Resurfacing + Exfoliating Energy Facial with Enzymes Versus Biossance Squalane + Zinc Sheer Mineral Sunscreen SPF 30 PA +++

Youth To The People Yerba Mate Resurfacing + Exfoliating Energy Facial with Enzymes Versus Biossance Squalane + Zinc Sheer Mineral Sunscreen SPF 30 PA +++ This smoothing exfoliator is formulated around Lactic Acid and Bromelain to refine skin texture and brigh

Written by Peptide Therapy Guide Editorial Team
For education only

This guide cannot diagnose a condition or recommend a personal treatment plan. Discuss medical questions with a qualified professional.

Youth To The People Yerba Mate Resurfacing + Exfoliating Energy Facial with Enzymes Versus Biossance Squalane + Zinc Sheer Mineral Sunscreen SPF 30 PA +++

This smoothing exfoliator is formulated around Lactic Acid and Bromelain to refine skin texture and brighten dull-looking skin.

This hybrid sunscreen covers the full UV range and blocks ~97% of UVB at SPF 30.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Bambusa Arundinacea Stem Extract

Diatomaceous Earth

Carthamus Tinctorius Seed Oil

Propanediol

Aloe Barbadensis Leaf Juice

Cetyl Alcohol

Glyceryl Stearate

Glycerin

Lactic Acid

Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Niacinamide

Phenoxyethanol

C15-19 Alkane

Ilex Paraguariensis Leaf Extract

Ilex Guayusa Leaf Extract

Potassium Sorbate

Polyglyceryl-6 Laurate

Tocopherol

Ethylhexylglycerin

Bromelain

Sodium Phytate

Papain

Polyglycerin-6

Zingiber Officinale Root Oil

Passiflora Edulis Fruit Extract

Xanthan Gum

Curcuma Longa Root Powder

Hylocereus Undatus Fruit Extract

Water, Bambusa Arundinacea Stem Extract, Diatomaceous Earth, Carthamus Tinctorius Seed Oil, Propanediol, Aloe Barbadensis Leaf Juice, Cetyl Alcohol, Glyceryl Stearate, Glycerin, Lactic Acid, Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Niacinamide, Phenoxyethanol, C15-19 Alkane, Ilex Paraguariensis Leaf Extract, Ilex Guayusa Leaf Extract, Potassium Sorbate, Polyglyceryl-6 Laurate, Tocopherol, Ethylhexylglycerin, Bromelain, Sodium Phytate, Papain, Polyglycerin-6, Zingiber Officinale Root Oil, Passiflora Edulis Fruit Extract, Xanthan Gum, Curcuma Longa Root Powder, Hylocereus Undatus Fruit Extract

Zinc Oxide

Caprylic/Capric Triglyceride

Squalane

Cetearyl Alcohol

Methyl Dihydroabietate

Sorbitan Olivate

Coco-Glucoside

Cetyl Palmitate

Polyglyceryl-3 Polyricinoleate

Caprylyl/Capryl Glucoside

Nymphaea Alba Flower Extract

Acacia Senegal Gum

Ethyl Ferulate

Sodium Gluconate

Lecithin

Sodium Palmitoyl Proline

Polyhydroxystearic Acid

Isostearic Acid

Zinc Oxide, Water, Caprylic/Capric Triglyceride, Squalane, Glycerin, Cetearyl Alcohol, Methyl Dihydroabietate, Sorbitan Olivate, Coco-Glucoside, Cetyl Palmitate, Polyglyceryl-3 Polyricinoleate, Caprylyl/Capryl Glucoside, Nymphaea Alba Flower Extract, Acacia Senegal Gum, Ethyl Ferulate, Xanthan Gum, Sodium Gluconate, Lecithin, Sodium Palmitoyl Proline, Polyhydroxystearic Acid, Ethylhexylglycerin, Phenoxyethanol, Isostearic Acid

Reviews

Be the first to review

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

Connected reading

Helpful context for this guide

Source-derived material selected through this article’s indexed topics.

P

About the author

Peptide Therapy Guide Editorial Team

Editorial team for Peptide Therapy Guide.

View all articles →