Independent education resourceInformation here does not replace care from a qualified health professional.
Peptide Therapy GuideClear peptide education

Educational guide

Tula Skincare Glow & Get It Cooling & Brightening Eye Balm Versus Biossance Squalane + Marine Algae Eye Cream

Tula Skincare Glow & Get It Cooling & Brightening Eye Balm Versus Biossance Squalane + Marine Algae Eye Cream This calming eye moisturizer is formulated around Aloe Barbadensis Leaf Juice and Lactococcus Ferment Lysate to calm redness and hydrate skin. This an

Written by Peptide Therapy Guide Editorial Team
For education only

This guide cannot diagnose a condition or recommend a personal treatment plan. Discuss medical questions with a qualified professional.

Tula Skincare Glow & Get It Cooling & Brightening Eye Balm Versus Biossance Squalane + Marine Algae Eye Cream

This calming eye moisturizer is formulated around Aloe Barbadensis Leaf Juice and Lactococcus Ferment Lysate to calm redness and hydrate skin.

This anti-aging eye moisturizer is formulated around Squalane and Palmitoyl Tripeptide-5 to soften the look of wrinkles and hydrate skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Propanediol

Aloe Barbadensis Leaf Juice

Sodium Stearate

Xylitol

Lactococcus Ferment Lysate

Synthetic Fluorphlogopite

Oleth-20

Glycerin

Caffeine

Citrullus Lanatus Fruit Extract

Lens Esculenta Fruit Extract

Pyrus Malus Fruit Extract

Hyaluronic Acid

Vaccinium Angustifolium Fruit Extract

Tocopherol

Sodium PCA

Dicapryl Succinate

Menthone Glycerin Acetal

Menthyl Lactate

Capryloyl Glycerin/Sebacic Acid Copolymer

Xanthan Gum

Sodium Lactate

Tin Oxide

Sodium Chloride

Ethylhexylglycerin

Phenoxyethanol

Sodium Benzoate

Potassium Sorbate

CI 77891

CI 42090

CI 19140

Water, Propanediol, Aloe Barbadensis Leaf Juice, Sodium Stearate, Xylitol, Lactococcus Ferment Lysate, Synthetic Fluorphlogopite, Oleth-20, Glycerin, Caffeine, Citrullus Lanatus Fruit Extract, Lens Esculenta Fruit Extract, Pyrus Malus Fruit Extract, Hyaluronic Acid, Vaccinium Angustifolium Fruit Extract, Tocopherol, Sodium PCA, Dicapryl Succinate, Menthone Glycerin Acetal, Menthyl Lactate, Capryloyl Glycerin/Sebacic Acid Copolymer, Xanthan Gum, Sodium Lactate, Tin Oxide, Sodium Chloride, Ethylhexylglycerin, Phenoxyethanol, Sodium Benzoate, Potassium Sorbate, CI 77891, CI 42090, CI 19140

Caprylic/Capric Triglyceride

Squalane

Sorbitan Olivate

Cetearyl Olivate

Jojoba Esters

Glyceryl Stearate Se

Panthenol

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Cetyl Palmitate

Spilanthes Acmella Flower Extract

Palmitoyl Tripeptide-5

Sorbitan Palmitate

Dunaliella Salina Extract

Astaxanthin

Sodium Hyaluronate

Citric Acid

Water, Caprylic/Capric Triglyceride, Squalane, Glycerin, Sorbitan Olivate, Cetearyl Olivate, Jojoba Esters, Glyceryl Stearate Se, Panthenol, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Cetyl Palmitate, Spilanthes Acmella Flower Extract, Palmitoyl Tripeptide-5, Sorbitan Palmitate, Dunaliella Salina Extract, Astaxanthin, Sodium Hyaluronate, Phenoxyethanol, Ethylhexylglycerin, Tocopherol, Citric Acid

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Tocopherol is a fat-soluble antioxidant known as Vitamin E.

You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.

Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.

It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.

This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.

Concentrations usually range from 0.1-1% in most leave-on products.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

Connected reading

Helpful context for this guide

Source-derived material selected through this article’s indexed topics.

P

About the author

Peptide Therapy Guide Editorial Team

Editorial team for Peptide Therapy Guide.

View all articles →