Independent education resourceInformation here does not replace care from a qualified health professional.
Peptide Therapy GuideClear peptide education

Educational guide

Kinetic Analysis of Peptide Aggregation

September 15, 2018 (Vol. 38, No. 16) ARGEN’s Continuous Monitoring Yields Real-Time Data Peptide-based pharmaceutical technology requires the delivery of therapeutic oligopeptides as designed in a stable form for effective application. Downstream from therapeu

Written by Peptide Therapy Guide Editorial Team
For education only

This guide cannot diagnose a condition or recommend a personal treatment plan. Discuss medical questions with a qualified professional.

September 15, 2018 (Vol. 38, No. 16)

ARGEN’s Continuous Monitoring Yields Real-Time Data

Peptide-based pharmaceutical technology requires the delivery of therapeutic oligopeptides as designed in a stable form for effective application. Downstream from therapeutic peptide isolation or synthesis, peptides are often subjected to HPLC purification, synthetic modification, and preparatory treatments for long-term storage. Spoilage in the form of aggregation, degradation, or oxidation can occur during any of these processes.

Using ARGEN (Aggregation Rate GENerator), a user can correlate spoilage modes to changes in molecular weight. These correlations are generated continuously and concurrently with up to 15 other samples to rapidly survey a process for conditions leading to optimal product quality. In this study, ARGEN was used to analyze spoilage which caused increases in molecular weight due to aggregation or association. Specifically, this application note discusses measures of stability, time to dimer (TD), and time to tetramer (TT), and it is important to note that stable peptide products have very long TD and TT values.

Methodology: Monitoring Peptide Aggregation with ARGEN

Human insulin (Sigma I2643) was dissolved in acidified deionized water to concentrations of 2 mg/mL. After dissolution, the pH was adjusted with 0.1 M HCl and 0.1 NaOH to pH 4.3. Each sample was loaded into a disposable polystyrene cuvette and held at a constant temperature for up to 48 hours (Table).

Results: Monitoring Insulin Aggregation with ARGEN

Insulin showed easily observable aggregation over a 48-hour period, as depicted in Figure 1. Insulin aggregates similarly to larger polypeptides previously studied by ARGEN, forming a milky solution after sufficient time passes. At 50 °C, the study’s lowest thermal condition, insulin remained somewhat stable with a low aggregation signal for 24 hours. In contrast, samples held at higher temperatures showed exponential aggregation.

Aggregation kinetics of insulin incubated at 53.5 °C indicated there was a temperature-dependent destabilization. Further destabilization occurred as the temperature increased to 57.0 °C. Kinetic data revealed the formation of metastable dimers in some samples after the initial heating. In the most thermally stressed samples, these dimers existed with little aggregation for several hours before aggregating to high-molecular-weight species. In less-stressed samples, the metastable species existed for at least 24 hours before forming high-molecular-weight species.

Analysis of kinetic data reveals two interesting measurements: time to dimer and time to tetramer. As aforementioned, several samples quickly achieved a population of metastable dimers (Figure 1). The high-temperature sample was the quickest to achieve this population. The other samples did not form a population of metastable dimers, but they held samples with scattering signals higher than the monomer population (Figures 1 & 2). Because aggregation rate (AR) is normally determined from the TD, the AR measurement for the high-temperature sample was inflated when compared to the other samples that did not show the existence of the metastable dimer population in their kinetic curves (Figure 2).

Figure 1. Insulin aggregates with Arrhenius-like kinetics for 48 hours. ARGEN observed a monotonic relationship between stability and temperature. Samples at 57 °C (blue) were less stable than samples at 53.5 °C (green), which were less stable than samples held at 50 °C (black). Interestingly, many samples formed metastable dimer populations that existed for several hours before aggregating to higher-order multimers.

To better understand the stability of each sample, TT is used to calculate an AR, as shown in Figure 3. This measurement is a better reflection of each sample because it is independent of the formation of a metastable population. TT and the AR value derived from it reflect the speed at which nuclei for higher-order aggregates are becoming ubiquitous in solution. The necessity of this measurement is not obvious without the time-dependent, normalized, molecular weight curves. For the three thermal conditions in this experiment, the ARs derived from TT showed an exponential relationship where increasing temperature exponentially increases AR (Figure 3).

Figure 2. As temperature increases, time to dimerization decreases. The related measure, aggregation rate (AR), increases with respect to temperature.

Figure 3. There is an approximately linear relationship between temperature and TT. This is reflected in the exponential relationship between AR and TT. This AR is different from the AR calculated from time to dimerization because it is blind to the rapid formation of metastable dimers; instead, it is based on the formation of unstable, higher-order aggregates which act as nuclei for further aggregation phenomena.

Conclusion

In this study, ARGEN is used to continuously monitor a vital peptide-hormone-based pharmaceutical. ARGEN demonstrates its utility in studying thermally induced peptide aggregation and the value of kinetic stability measurements when investigating protein and peptide aggregation phenomenon. The results of this experiment are intuitive, with increases in temperature causing faster aggregation. However, the observation of metastable populations would have been impossible without ARGEN’s continuous monitoring.

This study highlights the benefits of continuous monitoring yielding real-time data. Further studies with ARGEN can investigate the effects of formulation conditions, storage conditions, or contaminant stressors on peptide stability.

Michael Drenski ([email protected]) is chief technology officer at Fluence Analytics.

Connected reading

Helpful context for this guide

Source-derived material selected through this article’s indexed topics.

Related questions

01What was this study about?

It has been noted in around 20 percent of the world population suffers from some form of pain or the other. In many individuals, pain may be relieved initially with pain medications, but soon tolerance develops, and there is a decrease in the efficacy of pain relievers. One of the main symptoms of IBS seen commonly in many sufferers is chronic abdominal pain. Professor Lewis said, "All pains are complex, but gut pain is particularly challenging to treat and affects around 20 percent of the world's population. Current drugs are failing to produce effective pain relief in many patients before side effects limit the dose that can be administered." Professor Brierley echoed this statement saying, "Internal organs have a complex network of sensory nerves that have a wide array of voltage-gated ion channels and receptors to detect stimuli... The hypersensitivity of these nerves in disease often contributes to the development of pain."

Source: www.news-medical.net ↗
02So, how can this definition challenge be overcome?

To precisely define self and non-self peptides and, in turn, self-similarity, we must first improve our understanding of the adaptive immune cascade and its constituent components. In brief, the fundamental unit of adaptive immune recognition comprises the major histocompatibility complex (MHC) molecules (called the human leukocyte antigen [HLA] in humans), the peptide being presented (and, in turn, identified as self or non-self), and the T cell receptor.

Source: www.news-medical.net ↗
03What is nisin?

Some bacterial species produce antimicrobial peptides known as bacteriocins that have been used in the food industry as preservatives. For example, nisin, which is produced by Lactococcus lactis, has broad-spectrum bactericidal activity and has been used as a food preservative throughout the world. Nisin is effective in controlling Gram-positive bacteria such as Clostridioides difficile. In combination with other compounds like ethylene diamine tetra-acetic acid and cinnamaldehyde, nisin has been effective in controlling enterotoxigenic Gram-negative bacteria such as Escherichia coli. Previous studies have used chicken and mouse models to demonstrate the in vivo efficacy of nisin on the microbiome, whereas nisin efficacy has been proven in ex vivo experiments on the human microbiome. To date, no studies have assessed the in vivo effects of nisin in large mammals.

Source: www.news-medical.net ↗
04What are functional peptides?

Conventional pharmacological studies on spices have traditionally focused on secondary metabolites like polyphenols, alkaloids, and terpenes. More recently, food science research has also examined spice proteins and their enzymatic hydrolysates, using proteomic methods such as liquid chromatography–tandem mass spectrometry (LC-MS/MS) to identify short bioactive peptide sequences released from larger precursor proteins.6 Once released during food processing, fermentation, or gastrointestinal digestion, these functional peptides can act as metabolic regulators, antimicrobials, or antioxidants.1 Functional peptides refer to specific protein fragments that, once released from their parent proteins, exert biological activities.1,2 In the context of foods, these activities are most often demonstrated using in vitro biochemical or cell-based assays, and their physiological relevance depends on bioavailability and dose.2 Unlike intact proteins, which can have the potential to be allergenic or difficult to absorb due to their complex tertiary structures, functional peptides may exhibit improved bioaccessibility, and some small peptides can cross the intestinal epithelial barrier via peptide transport systems. However, absorption efficiency varies substantially by peptide sequence and digestive conditions.6 Nutriomics and mechanistic investigations have established that the bioactivity of a peptide is dictated by its physicochemical properties, particularly its amino acid composition, molecular weight, and net charge. For example, the presence of hydrophobic amino acids like proline, leucine, and valine often correlates with high antioxidant and enzyme-inhibitory activity.2,3 Smaller peptides, typically those less than three kilodaltons (kDa) in size, exhibit greater stability against proteolytic degradation in the gastrointestinal tract.3 Moreover, cationic peptides are particularly effective as antimicrobial agents through their electrostatic interactions with bacterial membranes.3

Source: www.news-medical.net ↗
05How do these peptides act?

These peptides, like the parent compound AC253, acted as antagonists at the AMY receptor. They were also resistant to protein breakdown, and crossed the blood-brain barrier easily when injected into the abdominal cavity, to localize in the hippocampus, which is crucial in memory. These peptides protected the brain against beta-amyloid injury, and normalized the AD-associated impairment of the memory-associated long-term potentiation of nerve impulses in the hippocampus. They improved memory testing results, and reduced the level of inflammation in the brain. These effects appear to be mediated via the blockade of AMY receptors. For instance, inhibition of microglial AMY receptors reduce the activation of the inflammasome NLRP3. This reduces the secretion of inflammatory chemicals in the surrounding brain tissue, which offers another mechanism for lower amyloid production. In addition, these peptides increase the rate of outflow of amyloid beta from the brain, which also contributes to a lower level of amyloid after treatment. These marked changes all occurred within a relatively short span of treatment. A very important additional finding was that treatment with these peptides brought about improvement in mice which were showing signs of well-established AD in the brain as well as in their behavior. This is unique in that most therapies fail to affect the progress of AD once it has begun to manifest clinically. Peptides also have fewer off-target effects. Small molecules are easy to administer, inexpensive to make and cross the blood-brain barrier more rapidly. For this reason, the team resorted to computational tools and artificial intelligence to come up with a new small molecular drug based on these peptides. This can be taken orally, and is similar in size and structure to the medications used for medical conditions like high blood pressure. An optimized version is being developed to enable human trials to be conducted. The work so far has taken about two decades, building step upon painstaking step to come up with the right solution. However, says Jhamandas, “Occasionally you come across a discovery that has the potential to change the game in a very fundamental way, like hitting a home run, and I'm very excited that we are really on to something here.” Short amylin receptor antagonist peptides improve memory deficits in Alzheimer’s disease mouse model. Rania Soudy, Ryoichi Kimura, Aarti Patel, Wen Fu, Kamaljit Kaur, David Westaway, Jing Yang & Jack Jhamandas. Scientific Reports, volume 9, Article number: 10942 (2019). https://doi.org/10.1038/s41598-019-47255-9. https://www.nature.com/articles/s41598-019-47255-9

Source: www.news-medical.net ↗
comparison

Comparisons

Side-by-side pages for commonly compared peptides and research compounds.

Source: peptideuniv.com
Research context

Read sources and limitations before applying a claim.

Longevity, Performance & Obesity Research

A research peptide formulation developed to investigate metabolic regulation, mitochondrial function, and nutrient-sensing pathways.

Source: mypeptidematch.com ↗
P

About the author

Peptide Therapy Guide Editorial Team

Editorial team for Peptide Therapy Guide.

View all articles →