Educational guide
beautyblender Boost Firming & Smoothing Peptide Primer Versus beautyblender Boost 4-In-1 Firming Peptide Setting Spray
beautyblender Boost Firming & Smoothing Peptide Primer Versus beautyblender Boost 4-In-1 Firming Peptide Setting Spray What's inside Key Ingredients Benefits Concerns Ingredients Side-by-side Water Glycerin Butylene Glycol Alcohol Denat. Pentylene Glycol Glyce
This guide cannot diagnose a condition or recommend a personal treatment plan. Discuss medical questions with a qualified professional.
beautyblender Boost Firming & Smoothing Peptide Primer Versus beautyblender Boost 4-In-1 Firming Peptide Setting Spray
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Glycerin
Butylene Glycol
Alcohol Denat.
Pentylene Glycol
Glyceryl Polymethacrylate
1,2-Hexanediol
Panthenol
Palmitoyl Tripeptide-5
Ceramide NP
Mimosa Tenuiflora Leaf Extract
Moringa Oleifera Seed Oil
Beta-Glucan
Palmitoyl Tripeptide-1
Tocopherol
Ammonium Acryloyldimethyltaurate/Vp Copolymer
Diphenylsiloxy Phenyl Trimethicone
CI 77891
Chlorella Vulgaris Extract
Glucose
Mica
Fructooligosaccharides
Fructose
Propylene Glycol
Sodium Polyacrylate
Cetearyl Olivate
Sodium Polyacrylate Starch
Eclipta Prostrata Extract
Sorbitan Olivate
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Silica
Tromethamine
Caprylic/Capric Triglyceride
Parfum
Ethylhexylglycerin
Trisodium Ethylenediamine Disuccinate
Melia Azadirachta Leaf Extract
Hydrogenated Lecithin
Sodium Acrylates Crosspolymer-2
Hexyl Cinnamal
Water, Glycerin, Butylene Glycol, Alcohol Denat., Pentylene Glycol, Glyceryl Polymethacrylate, 1,2-Hexanediol, Panthenol, Palmitoyl Tripeptide-5, Ceramide NP, Mimosa Tenuiflora Leaf Extract, Moringa Oleifera Seed Oil, Beta-Glucan, Palmitoyl Tripeptide-1, Tocopherol, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Diphenylsiloxy Phenyl Trimethicone, CI 77891, Chlorella Vulgaris Extract, Glucose, Mica, Fructooligosaccharides, Fructose, Propylene Glycol, Sodium Polyacrylate, Cetearyl Olivate, Sodium Polyacrylate Starch, Eclipta Prostrata Extract, Sorbitan Olivate, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Silica, Tromethamine, Caprylic/Capric Triglyceride, Parfum, Ethylhexylglycerin, Trisodium Ethylenediamine Disuccinate, Melia Azadirachta Leaf Extract, Hydrogenated Lecithin, Sodium Acrylates Crosspolymer-2, Hexyl Cinnamal
Polyester-5
Propanediol
Alcohol
Phenoxyethanol
Hydroxyacetophenone
Caffeine
Sodium Phytate
Acacia Dealbata Leaf Extract
Leuconostoc/Radish Root Ferment Filtrate
Acetyl Tetrapeptide-2
Sodium Acetate
Caprylyl Glycol
Pistacia Lentiscus Gum
Phenethyl Alcohol
Linalool
Water, Polyester-5, Propanediol, Caprylic/Capric Triglyceride, Alcohol, Phenoxyethanol, Hydroxyacetophenone, Caffeine, Parfum, Sodium Phytate, Acacia Dealbata Leaf Extract, Leuconostoc/Radish Root Ferment Filtrate, Acetyl Tetrapeptide-2, Sodium Acetate, Caprylyl Glycol, Pistacia Lentiscus Gum, Hydrogenated Lecithin, Phenethyl Alcohol, Ethylhexylglycerin, Hexyl Cinnamal, Linalool
Alternatives
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Caprylic/Capric Triglyceride (aka MCT Oil) is a lightweight emollient, solvent, and texture enhancer. It is considered a skin-softener by helping to prevent moisture loss.
Though it behaves like an oil, it is not technically one due to its chemical composition. One perk of this ingredient is that it is very stable, resistant to oxidation, and unlikely to go rancid.
In practice, that translates to a long shelf life and a consistently elegant skin feel.
While there is an assumption Caprylic Triglyceride can clog pores due to it being derived from coconut oil, there is no research supporting this. Just patch test if you have concerns.
Fractionated coconut oil and MCT Oil are both listed as Caprylic/Capric Triglyceride according to INCI. This is because INCI names are based on the ingredient’s final chemical composition and not its marketing name or source.
This ingredient is treated as the gold standard fungal acne safe oil. Even though it is coconut derived, the problematic lauric acid is stripped out.
This leaves just caprylic (C8) and capric (C10) acid. These chain lengths actually trend antifungal; a 2020 study found caprylic acid was enough to disrupt Malassezia furfur cell membrane, with a caprylic acid derivative damaging membrane structures at concentrations as low as 0.2%.
Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Hexyl Cinnamal is a fragrance ingredient with a similar scent to jasmine. It can be naturally found in chamomile essential oil.
This ingredient is a known EU allergen and may sensitize the skin. The EU requires this ingredient to be listed separately on an ingredients list.
Hexyl Cinnamal is not water soluble but is soluble in oils.
Hydrogenated Lecithin is a more stable version of lecithin.
It's made by taking lecithin (a phospholipid commonly found in soybeans and egg yolks) and hydrogenating it. This just means the unsaturated fatty acids are turned into saturated ones so they don't go bad as easily.
This ingredient is an emollient, emulsifier, and penetration enhancer. As an emollient, it helps soften and hydrate skin by trapping moisture within. As an emulsifier, it prevents oil and water ingredients from separating.
Hydrogenated Lecithin can form tiny spherical structures made of phospholipid bilayers called liposomes. These liposomes are able to capture compounds inside their structure and deliver them through the skin barrier.
Because phospholipids are a natural component of our cell membranes, this ingredient is inherently compatible with skin.
A 2021 study found lecithin-based surfactants were less harsh and more tolerable comared to Sodium Lauryl Sulfate (SLS).
Parfum is a catch-all term for an ingredient or more that is used to give a scent to products.
Also called "fragrance", this ingredient can be a blend of hundreds of chemicals or plant oils. This means every product with "fragrance" or "parfum" in the ingredients list is a different mixture.
For instance, Habanolide is a proprietary trade name for a specific aroma chemical. When used as a fragrance ingredient in cosmetics, most aroma chemicals fall under the broad labeling category of “FRAGRANCE” or “PARFUM” according to EU and US regulations.
The term 'parfum' or 'fragrance' is not regulated in many countries. In many cases, it is up to the brand to define this term.
For instance, many brands choose to label themselves as "fragrance-free" because they are not using synthetic fragrances. However, their products may still contain ingredients such as essential oils that are considered a fragrance by INCI standards.
One example is Calendula flower extract. Calendula is an essential oil that still imparts a scent or 'fragrance'.
Depending on the blend, the ingredients in the mixture can cause allergies and sensitivities on the skin. Some ingredients that are known EU allergens include linalool and citronellol.
Parfum can also be used to mask or cover an unpleasant scent.
The bottom line is: not all fragrances/parfum/ingredients are created equally. If you are worried about fragrances, we recommend taking a closer look at an ingredient. And of course, we always recommend speaking with a professional.
Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!